ProLinx 6201-WA-DFNT to DFNT Guide d'installation télécharger pdf (Page 2)

Please Read This Notice

Successful application of this module requires a reasonable working knowledge of the ProLinx

Module, its connected devices, and the application in which the combination is to be used. For this

reason, it is important that those responsible for implementation satisfy themselves that the

combination will meet the needs of the application without exposing personnel or equipment to

unsafe or inappropriate working conditions.

This manual is provided to assist the user. Every attempt has been made to assure that the

information provided is accurate and a true reflection of the product's installation requirements. In

order to assure a complete understanding of the operation of the product, the user should read all

applicable documentation on the operation of the connected devices.

Under no conditions will ProSoft Technology be responsible or liable for indirect or consequential

damages resulting from the use or application of the product.

Reproduction of the contents of this manual, in whole or in part, without written permission from

ProSoft Technology is prohibited.

Information in this manual is subject to change without notice and does not represent a

commitment on the part of ProSoft Technology Improvements and/or changes in this manual or the

product may be made at any time. These changes will be made periodically to correct technical

inaccuracies or typographical errors.

Important Installation Instructions

Power, input and output wiring must be in accordance with Class I, Division 2

wiring methods – Article 501-4 (b) of the National Electrical Code, NFPA 70 and

in accordance with the authority having jurisdiction. The following warnings must

be heeded:

A WARNING – EXPLOSION HAZARD – SUBSTITUTION OF

COMPONENTS MAY IMPAIR SUITABILITY FOR CLASS I, DIV. 2;

B WARNING – EXPLOSION HAZARD – WHEN IN HAZARDOUS

LOCATIONS, TURN OFF POWER BEFORE REPLACING OR WIRING

MODULES, and

C WARNING – EXPLOSION HAZARD – DO NOT DISCONNECT

EQUIPMENT UNLESS POWER HAS BEEN SWITCHED OFF OR THE

AREA IS KNOWN TO BE NONHAZARDOUS.

D "THIS DEVICE SHALL BE POWERED BY CLASS 2 OUTPUTS ONLY."

1 2 3 4 5 6 7 ... 49 50

Pas de commentaire

ProLinx 6201-WA-DFNT to DFNT Guide d'installation Page 2